VMware VCM 5.3 - TRANSPORT LAYER SECURITY IMPLEMENTATION Guide de l'utilisateur télécharger pdf (Page 180)

Alternately, you can manually add machines to the list rather than use the OS Provisioning Server

discovery process. To manually add machines, select Administration > Machines Manager > OS

Provisioning > Provisionable Machines and click Add. Use the wizard to add machines to the data grid.

You will need to know the machine MAC addresses. See the online Help for information about using the

wizard.

Provision Machines

Provisioning machines installs the selected operating system on the selected machines. You can install one

OS distribution on one or more target machines. To install a different OS distribution, configure a new OS

provisioning action.

Prerequisites

Target machines have a minimum of 1 GB RAM and meet the minimum RAM requirements for the

operating system.

On target machines with multiple network cards, you must configure the primary network interface

with a connection to the OS Provisioning Server deployment network. If you use a different network

on the primary interface, the deployment process appears to start, but you may receive communication

errors and the process ultimately fails.

The operating system you are installing is compatible with the hardware of the target machines. For

example, the operating system supports the drivers required by the hardware.

OS Distributions are collected and displayed in Administration > Machines Manager > OS

Provisioning > OS Distributions.

Eligible machines are discovered or added manually, and displayed in Administration > Machines

Manager > OS Provisioning > Provisionable Machines.

Procedure

1. Select Administration > Machines Manager > OS Provisioning > Provisionable Machines.

2. Select the machines.

3. Click Provision.

4. On the Select Machines page, add or remove machines and click Next.

5. On the Select OS Distribution page, select the operating system you are installing on the selected

machines and click Next.

6. On the Settings page, configure the options and click Next.

The options on the Settings page vary depending on the OS Distribution you selected. To facilitate

managing the machines in VCM, select Use DHCP to determine IP Address and License these

machines for VCM afterdeployment. See the online Help for more information about the settings.

NOTE Static IP addressing is recommended when deploying ESX or ESXi hosts. If DHCP is used, the

ESX or ESXi machine’s host name will be set to localhost rather than the host name provided during

deployment.

7. On the IP Settings page, configure the HostName and click Next.

If you did not select Use DHCP to determine IP address on the previous page, you will also need to

configure the IP Address, Subnet, Default Gateway, and DNS. See the online Help for more

information about the settings.

vCenter Configuration Manager Installation and Getting Started Guide

180 VMware, Inc.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 257 258

Pas de commentaire

VMware VCM 5.3 - TRANSPORT LAYER SECURITY IMPLEMENTATION Guide de l'utilisateur Page 180