VMware ESX 4.0 - GETTING STARTED UPDATE 1 Manuel d'utilisateur Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
n
For hardware iSCSI, a disk attached to an iSCSI controller, such as the QLogic qla405x. Software iSCSI is
not supported for booting or installing ESX.
n
Serial attached SCSI (SAS).
n
For Serial ATA (SATA), a disk connected through supported SAS controllers or supported on-board SATA
controllers. SATA disk drives connected behind supported SAS controllers or supported on-board SATA
controllers.
n
Supported SAS controllers include:
n
LSI1068E (LSISAS3442E)
n
LSI1068 (SAS 5)
n
IBM ServeRAID 8K SAS controller
n
Smart Array P400/256 controller
n
Dell PERC 5.0.1 controller
n
Supported on-board SATA controllers include:
n
Intel ICH9
n
Nvidia MCP55
n
ServerWorks HT1000
When installing ESX on SATA drives, consider the following:
n
Ensure that your SATA drives are connected through supported SAS controllers or supported onboard
SATA controllers.
n
NOTE ESXi does not support using local, internal SATA drives on the host server to create VMFS
datastores that are shared across multiple ESXi hosts.
ATA and IDE disk drives – ESX supports installing and booting on either an ATA drive or ATA RAID is
supported, but ensure that your specific drive controller is included in the supported hardware. IDE drives
are supported for ESX installation and VMFS creation.
Install ESX Using the Graphical Mode
The graphical mode is the recommended installation method if you are installing ESX for the first time. The
graphical mode runs by default if you do not select an alternate installation method.
Prerequisites
See “Prerequisites for Installing ESX,” on page 8.
Procedure
1 Use the BIOS to set the server to boot from the DVD.
a Reboot the machine.
b Press the key required to enter your machine’s BIOS setup or boot menu.
This key is often a function key or Delete.
c Set the CD-ROM drive as the first boot device.
2 Select Install ESX in graphical mode.
A series of installation messages scroll past until the Welcome page appears.
3 Click Next to continue.
Getting Started with ESX
VMware, Inc. 9
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Commentaires sur ces manuels

Pas de commentaire