VMware VCENTER SERVER 4.0 - GETTING STARTED UPDATE 1 Manuel d'utilisateur télécharger pdf (Page 11)

3 Retype the new password and press Enter.

Configuring IP Settings for ESXi

By default, DHCP sets the IP address, subnet mask, and default gateway.

For future reference, write down the IP address.

For DHCP to work, your network environment must have a DHCP server. If DHCP is not available, the host

assigns the link local IP address, which is in the subnet 169.254.x.x/16. The assigned IP address appears on the

direct console. If you do not have physical access to the host, you can access the direct console using a remote

management application.

When you have access to the direct console, you can optionally configure a static network address. The default

subnet mask is 255.255.0.0.

If your network does not have a DHCP server, configure the IP settings for ESXi manually from the direct

console.

Configure IP Settings from the Direct Console

If you have physical access to the host or remote access to the direct console, you can use the direct console to

configure the IP address, subnet mask, and default gateway.

Procedure

1 Select Configure Management Network and press Enter.

Getting Started with ESXi Installable

VMware, Inc. 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Pas de commentaire

VMware VCENTER SERVER 4.0 - GETTING STARTED UPDATE 1 Manuel d'utilisateur Page 11