VMware VMWARE CLOUD DIRECTOR 1.0 - TECHNICAL NOTE Guide de l'utilisateur télécharger pdf (Page 30)

The vApp networks are in vApps that were started at least once.

Procedure

1 Click Administration.

2 Select Cloud Resources > Networks.

3 Right-click the organization vDC network name and select Configure Services.

4 Click the Static Routing tab and click Add.

5 Type a name, network address, and next hop IP address.

The network address is for the first vApp network to which you want to add a static route. The next hop

IP address is the external IP address of that vApp network's router.

6 Select Within this network, and click OK.

7 Click OK.

8 Repeat Step 4 through Step 7 to add a route to the second vApp network.

Example: Static Routing Example

vApp Network 1 and vApp Network 2 are both routed to Org Network Shared. You can create static routes

on the organization vDC network to allow traffic between the vApp networks. You can use information about

the vApp networks to create the static routes.

Table 3-3. Network Information

Network Name Network Specification Router External IP Address

vApp Network 1 192.168.1.0/24 192.168.0.100

vApp Network 2 192.168.2.0/24 192.168.0.101

Org Network Shared 192.168.0.0/24 NA

On Org Network Shared, create a static route to vApp Network 1 and another static route to vApp Network

Table 3-4. Static Routing Settings

Static Route to

Network Route Name Network Next Hop IP Address Route

vApp Network 1 tovapp1 192.168.1.0/24 192.168.0.100 In this network

vApp Network 2 tovapp2 192.168.2.0/24 192.168.0.101 In this network

What to do next

Create firewall rules to allow traffic on the static routes.

Add Static Routes Between vApp Networks Routed to Different Organization vDC

Networks

An organization administrator can add static routes between two vApp networks that are routed to different

organization vDC networks. Static routes allow traffic between the networks.

You cannot add static routes between overlapping networks or fenced vApps. After you add a static route to

an organization vDC network, configure the network firewall rules to allow traffic on the static route. For

vApps with static routes, select the Always use assigned IP addresses until this vApp or associated networks

are deleted check box.

vCloud Director User's Guide

30 VMware, Inc.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 125 126

Pas de commentaire

VMware VMWARE CLOUD DIRECTOR 1.0 - TECHNICAL NOTE Guide de l'utilisateur Page 30