VMware VMWARE CLOUD DIRECTOR 1.0 - TECHNICAL NOTE Guide de l'utilisateur télécharger pdf (Page 31)

Static routes only function when the vApps included in the routes are running. If you change the parent

network of a vApp, delete a vApp, or delete a vApp network, and the vApp includes static routes, those routes

cannot function and you must remove them manually.

Prerequisites

Verify that you have the following items:

vShield Manager 5.1.

Two organization vDC networks routed to the same external network.

Static routing is enabled on both organization vDC networks.

A vApp network is routed to each organization vDC network.

The vApp networks are in vApps that were started at least once.

Procedure

1 Click Administration and select the organization vDC.

2 Click the Org vDC Networks tab, right-click the organization vDC network name, and select Configure

Services.

3 Click the Static Routing tab and click Add.

4 Type a name, network address, and next hop IP address.

The network address is for the vApp network to which you want to add a static route. The next hop IP

address is the external IP address of the router for the organization vDC network to which that vApp

network is routed.

5 Select To external network and click OK.

6 Click Add.

7 Type a name, network address, and next hop IP address.

The network address is for the vApp network that is routed to this organization vDC network. The next

hop IP address is the external IP address of the router for that vApp network.

8 Select Within this network and click OK.

9 Repeat Step 2 through Step 8 to add static routes to the second organization vDC network.

Example: Static Routing Example

vApp Network 1 is routed to Org vDC Network 1. vApp Network 2 is routed to Org vDC Network 2. You can

create static routes on the organization vDC networks to allow traffic between the vApp networks. You can

use information about the vApp networks and organization vDC networks to create the static routes.

Table 3-5. Network Information

Network Name Network Specification Router External IP Address

vApp Network 1 192.168.1.0/24 192.168.0.100

vApp Network 2 192.168.11.0/24 192.168.10.100

Org vDC Network 1 192.168.0.0/24 10.112.205.101

Org vDC Network 2 192.168.10.0/24 10.112.205.100

On Org vDC Network 1, create a static route to vApp Network 2 and another static route to vApp Network 1.

On Org vDC Network 2, create a static route to vApp Network 1 and another static route to vApp Network 2.

Chapter 3 Managing Cloud Resources

VMware, Inc. 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 125 126

Pas de commentaire

VMware VMWARE CLOUD DIRECTOR 1.0 - TECHNICAL NOTE Guide de l'utilisateur Page 31