VMware VIEW 4.5 Manuel d'utilisateur télécharger pdf (Page 20)

2 - 9

8. From the Key list, select the key you imported in the Importing keys

and certificates section.

9. Click the Finished button.

Creating the virtual server

Next, we configure a virtual server that references the profiles and pool you

created in the preceding procedures.

To create the virtual server

1. On the Main tab, expand Local Traffic, and then click Virtual

Servers.

The Virtual Servers screen opens.

2. In the upper right portion of the screen, click the Create button.

The New Virtual Server screen opens.

3. In the Name box, type a name for this virtual server. In our

example, we type view-virtual.

4. In the Destination section, select the Host option button.

5. In the Address box, type the IP address of this virtual server. In our

example, we use 10.133.81.10.

6. In the Service Port box, type 443, or select HTTPS from the list.

Figure 2.4 Configuring the virtual server properties

7. From the Configuration list, select Advanced.

The Advanced configuration options appear.

8. Leave the Type list at the default setting: Standard.

9. From the Protocol Profile (Client) list select the profile you created

in Creating the WAN optimized TCP profile, on page 2-6. In our

example, we select view-wan-opt.

10. From the Protocol Profile (Server) list, select the profile you

created in Creating the UIE persistence profile, on page 2-7. In our

example, we select view-lan-opt.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

Pas de commentaire

VMware VIEW 4.5 Manuel d'utilisateur Page 20