VMware VIEW 4.5 Manuel d'utilisateur télécharger pdf (Page 5)

Introducing the BIG-IP System 10.2.1 Deployment Guide for VMware View 4.5

Deployment Guide 1 - 2

Product versions and revision history

Product and versions tested for this deployment guide:

Prerequisites and configuration notes

The following are prerequisites and configuration notes for this guide:

◆ Important: Do NOT run the VMware View Application Template. The

current BIG-IP Application Template for View does not support PCoIP

in View 4.5. We recommend using this deployment guide for configuring

the BIG-IP with VMware View 4.5.

◆ If you are using or plan to use PC over IP (PCoIP), see the Special Note

about PC over IP, on page 1-4.

◆ Because the BIG-IP LTM is offloading SSL for the VMware

deployment, this guide does not include VMware Security servers.

◆ This deployment guide is written with the assumption that VMware

server(s), Virtual Center and connection brokers are already configured

on the network and are in good working order.

◆ This deployment guide is written with the assumption that Active

Directory is used in your VMware View deployment, according to

VMware’s installation and administration guidance.

◆ Your BIG-IP APM device must be configured to point at the Active

Directory environment against which your users will be authenticating.

The device wizard documented in this guide asks you for this

information.

◆ NTP must be configured on the device. The device wizard documented

in this guide will ask you for this information.

Product Tested Version Tested

BIG-IP LTM 10.2.1

BIG-IP APM 10.2.1

VMware View 4.5

Document Version Description

1.0 New guide for View 4.5 and 10.2.1

1.1 Added a section on configuring a Webtop for BIG-IP

APM.

Added a Server SSL profile to the APM virtual server.

1 2 3 4 5 6 7 8 9 10 ... 37 38

Pas de commentaire

VMware VIEW 4.5 Manuel d'utilisateur Page 5